ASTM A213 / ASME SA213 T1 T11 T12 Alloy Steel Seamless tube for Boiler , Superheater , Heat exchanger application
Yuhong Group supply huge qty of Cr-Mo Alloy seamless pipe and tube , and export more than 35 countries . Our alloy seamless tube be widely used in boiler and heating.
YUHONG controls the entire manufacturing process from raw material to finished products, Inspection points are localed in the manufacturing process to ensure all products meet all requirements. In such quality control system, faults are detected at the earliest possible stage of the production process in order to eliminate the risk of rejection at final inspection. We have made continuous efforts to reduce the problem throughout total quality assurance system including traceability control, YUHONG not only inspect by ourself , also through TPI like BV, SGS, DNV, ABS, MOODY, IBR, so that today the quality of our productsis clearly recognized by our client.
| | | | | | | | | | |
| Carbon | Chromiun | Low Temperature | Stainless Steel | Duplex | Copper& Bronze | Titanium | Ni-Alloy |
| SA178-A | SA213-T1 | SA333-Gr.1 | SA213 | TP316L | A789-S31803 | SB111-C70600 | SB338-GR.1 | SB163 | NO2200 |
| SA178-C | SA213-T11 | SA333-Gr.3 | SA249 | TP316H | A789-S32205 | SB111-C71500 | SB338-GR.2 | SB167 | NO2201 |
| SA179 | SA213-T12 | SA333-Gr.6 | SA268 | TP316Ti | A789-S32750 | SB111-C71640 | SB338-GR.5 | SB444 | NO8020 |
| SA192 | SA213-T22 | SA333-Gr.7 | SA269 | TP316LN | A789-S32760 | SB111-C68700 | SB338-GR.7 | SB514 | NO6022 |
| SA209-T1 | SA213-T5 | SA333-Gr.8 | SA376 | TP321 | A789-S32707 | SB111-C44300 | SB338-GR.9 | SB619 | N10276 |
| SA209-T1a | SA213-T9 | SA334-Gr.1 | TP304 | TP321H | A789-S32304 | | SB338-GR.12 | SB622 | NO4400 |
| SA209-T1b | SA213-T91 | SA334-Gr.3 | TP304L | TP347 | A789-S31500 | | | SB626 | NO6600 |
| SA210-A1 | | SA334-Gr.6 | TP304H | TP347H | S31254 | | | SB674 | NO6601 |
| SA210-C | | SA334-Gr.7 | TP304N | TP405 | 254MA | | | SB677 | NO6625 |
| SA214 | | SA334-Gr.8 | TP310H | TP409 | 17-4PH | | | SB704 | NO690 |
| SA513 MT 1010 | | | TP310S | TP410 | 17-7PH | | | SB705 | NO8800 |
| SA513 MT 1015 | | | TP309S | TP430 | 15-7PH | | | N1001 | NO8810 |
| SA513 MT 1020 | | | TP317 | TP439 | | | | N10665 | NO8811 |
| | | | TP317L | TP444 | | | | N10675 | NO8825 |
| | | | TP348 | TP446 | | | | TP904L | |
| | | | TP347HFG | | | | | | |
| Tube Sizes for Heat Exchangers & Condensers & Boiler |
| | | | | | | | | | |
| Outside Diameter | | BWG |
| 25 | 22 | 20 | 18 | 16 | 14 | 12 | 10 |
| | Wall Thickness mm |
| 0.508 | 0.71 | 0.89 | 1.24 | 1.65 | 2.11 | 2.77 | 3.40 |
| mm | inch | | Weight kg/m |
| 6.35 | 1/4 | 0.081 | 0.109 | 0.133 | 0.174 | 0.212 | | | |
| 9.53 | 3/8 | 0.126 | 0.157 | 0.193 | 0.257 | 0.356 | 0.429 | | |
| 12.7 | 1/2 | | 0.214 | 0.263 | 0.356 | 0.457 | 0.612 | 0.754 | |
| 15.88 | 5/8 | | 0.271 | 0.334 | 0.455 | 0.588 | 0.796 | 0.995 | |
| 19.05 | 3/4 | | 0.327 | 0.405 | 0.553 | 0.729 | 0.895 | 1.236 | |
| 25.4 | 1 | | 0.44 | 0.546 | 0.75 | 0.981 | 1.234 | 1.574 | 2.05 |
| 31.75 | 1 1/4 | | 0.554 | 0.688 | 0.947 | 1.244 | 1.574 | 2.014 | 2.641 |
| 38.1 | 1 1/2 | | 0.667 | 0.832 | 1.144 | 1.514 | 1.904 | 2.454 | 3.233 |
| 44.5 | 1 3/4 | | | | 1.342 | 1.774 | 2.244 | 2.894 | 3.5 |
| 50.8 | 2 | | | | 1.549 | 2.034 | 2.574 | 3.334 | 4.03 |
| 63.5 | 2 1/2 | | | | 1.949 | 2.554 | 3.244 | 4.214 | 5.13 |
| 76.2 | 3 | | | | 2.345 | 3.084 | 3.914 | 5.094 | 6.19 |
| 88.9 | 3 1/2 | | | | 2.729 | 3.609 | 4.584 | 5.974 | 7.27 |
| 101.6 | 4 | | | | | 4.134 | 5.254 | 6.854 | 8.35 |
| 114.3 | 4 1/2 | | | | | 4.654 | 5.924 | 7.734 | 9.43 |
ASTM A213/ASME SA213 T2, T11, T12, T22, T91, T92 Chemical Composition and Mechanical Properties
| Grade | Chemical Composition% |
| C | Si | Mn | P, S Max | Cr | Mo | Ni Max | V | Al Max |
| T2 | 0.10~0.20 | 0.10~0.30 | 0.30~0.61 | 0.025 | 0.50~0.81 | 0.44~0.65 | – | – | – |
| T11 | 0.05~0.15 | 0.50~1.00 | 0.30~0.60 | 0.025 | 1.00~1.50 | 0.44~0.65 | – | – | – |
| T12 | 0.05~0.15 | Max 0.5 | 0.30~0.61 | 0.025 | 0.80~1.25 | 0.44~0.65 | – | – | – |
| T22 | 0.05~0.15 | Max 0.5 | 0.30~0.60 | 0.025 | 1.90~2.60 | 0.87~1.13 | – | – | – |
| T91 | 0.07~0.14 | 0.20~0.50 | 0.30~0.60 | 0.02 | 8.0~9.5 | 0.85~1.05 | 0.4 | 0.18~0.25 | 0.015 |
| T92 | 0.07~0.13 | Max 0.5 | 0.30~0.60 | 0.02 | 8.5~9.5 | 0.30~0.60 | 0.4 | 0.15~0.25 | 0.015 |
| Grade | Chemical Composition% | Mechanical Properties |
| W | B | Nb | N | T. S | Y. P | Elongation | Hardness |
| T2 | – | – | – | – | ≥ 415MPa | ≥ 205MPa | ≥ 30% | 163HBW(85HRB) |
| T11 | – | – | – | – | ≥ 415MPa | ≥ 205MPa | ≥ 30% | 163HBW(85HRB) |
| T12 | – | – | – | – | ≥ 415MPa | ≥ 220MPa | ≥ 30% | 163HBW(85HRB) |
| T22 | – | – | – | – | ≥ 415MPa | ≥ 205MPa | ≥ 30% | 163HBW(85HRB) |
| T91 | – | – | 0.06~0.10 | 0.03~0.07 | ≥ 585MPa | ≥ 415MPa | ≥ 20% | 250HBW(25HRB) |
| T92 | 1.50~2.00 | 0.001~0.006 | 0.04~0.09 | 0.03~0.07 | ≥ 620MPa | ≥ 440MPa | ≥ 20% | 250HBW(25HRB) |
ASTM A213/ASME SA213 T2, T11, T12, T22, T91, T92 Tolerance
| Outside Diameter | OD Tolerance | WT Tolerance | Ovality Tolerance | Cut Length Tolerance |
| OD≤ 12, 7 mm | ± 0, 13 mm | ± 15 % | – | + 3, 18 mm, – 0 mm |
| 12, 7 mm < OD ≤ 38, 1 mm | ± 0, 13 mm | ± 10 % | max, 1, 65 mm | + 3, 18 mm, – 0 mm |
| 38, 1 mm < OD ≤ 88, 9 mm | ± 0, 25 mm | ± 10 % | max, 2, 41 mm | + 4, 76 mm, – 0 mm |
- SA213 T11 Alloy Steel Tube use in Petrochemical Industry
- SA213 T11 Alloy Steel Tube use in Chemical Industry
- SA213 T11 Alloy Steel Tube use in Nuclear Power Plant Industry
- SA213 T11 Alloy Steel Tube use in Oil and Gas Industry
- SA213 T11 Alloy Steel Tube use in Research & Development
- SA213 T11 Alloy Steel Tube use in Mega Projects & Defense & Development Industries
- SA213 T11 Alloy Steel Tube use in Pulp & Paper Indusry
Product Tags:
|
|
ASTM A213/ ASME SA213 T11 Alloy Steel Seamless Tube For Superheater Images
|
